• <legend id="66666"></legend>
  • <center id="66666"></center>


    1.主要技術特點


    NAG-M紅外線模具加熱爐的熱源是采用鐵烙鋁合金電熱絲,特點:高效節能。在鐵烙鋁合金電熱絲后面安裝有紅外線輻射板,它可以有效地把熱量反射給爐膛,輻射板、鐵烙鋁合金電熱絲組成一套紅外線加熱體,是將熱量以電磁能的形式往爐膛輻射,模具吸收并將電磁能又轉換成熱能的一種加熱方式。模具框是采用耐高溫不銹鋼刪格結構設計,具有良好的機械強度,又具有良好的通風和通光效果。


    2.本產品三大亮點:


    (1)保護模具安全:均勻適速加熱,避免了快速加熱而引起的模具開裂氧化等問題,減少了不必要的修模,大大提高了模具的使用壽命。


    (2)節能:


    ①合理的抽屜式托盤設計,大幅降低了熱能的流失;


    ②熱能的有效利用,自主研發的紅外線輻射板吸收熱量以后直接輻射到爐膛后對模具進行加熱.


    ③高密度高分子玻璃纖維材料保溫措施,有效降低熱量的流失,從而達到直接節能的目的。


    (3)操作安全、快捷、舒適:抽屜式的取放模具,避免了傳統式模具模打開時熱氣往身上冒,而產生的身體不適。進而達到安全操作工作效率提高的目的。


    (4)高效:一次性加熱多套模具,避免了換模頻率高時沒有熱模換的情況


     


    1.Main technical features:


    The heat source of NAG-M infrared ray Die heater is made of iron-seared aluminum alloy heating wire. There is an infrared radiation plate installed behind the iron-seared aluminum alloy heating wire, it can effectively reflect the heat to the furnace chamber, radiation plate, iron-seared aluminum alloy heating wire constitute a set of infrared heating body, the heat radiation reflect to the furnace in the form of electromagnetic energy, the dies absorb and exchange the electromagnetic energy into a heating method of heat energy. The die frame is designed with high temperature resistant stainless steel fence structure, which has great mechanical strength and good ventilation and light effect.


    2. Three highlights of this product:


    (1) Die protection: uniform moderate heating can avoid the problems of die cracking and oxidation caused by rapid heating, reduce unnecessary die repair, and greatly improve the service life of the die.


    (2)Energy saving


    ①  A reasonable drawer type tray design, significantly reduce the loss of heat energy; 


    ② The effective use of heat energy, the self-developed infrared radiation plate absorbs heat and radiates directly to the furnace to heat the die.


    ③  High density polymer glass fiber material insulation measures, effectively reduce heat loss, so as to achieve direct energy conservation.


    (3) Safe, fast and comfortable operation: The drawer type of taking and placing die can avoid physical discomfort caused by hot air steaming into the body when the traditional mold of die are opened. Then achieve safe operation efficiency to improve the purpose.


    (4) High efficiency: heating multiple sets of die at once, avoiding the situation that there is no hot die change when the die change frequency is high


      主要技術參數Main Technical Parameters; 

    Serial  No

    序號

    Ltems

    項目

    Moder No.

    型號

    NAG~I60

    NAG~I77

    NAG~I110

    1

    Structure mode

    結構方式

    drawer-style

    抽屜式

    2

    Heating mode

    加熱方式

    heating cord

    電熱絲

    3

    Total Power(KW)

    總功率(KW)

    9

    10

    32

    4

    Suitable mould(mm)

    適用模具(mm)

    ?200×120

    ?200×120

    ?320×200

    5

    Number of mould(Pcs)

    模具數量(個)

    7

    9

    8

    6

    Exo.Dimension(cm)

    外形尺寸(mm)

    1300*1500(外路軌760)*1540(包括電箱高度490)

    1410*1650(外路軌825)*1760(包括電箱高度490)

    2420*1650(外路軌825)*1760(包括電箱高度490)

    7

    Temperature coefficient

    溫度系數

    Rated heating temperature :450~550°C

    額定加熱溫度:450~550°C


    1.jpg

     

    紅外線輻射節能模具爐

    Die heater

    NAG-M紅外線模具加熱爐的熱源是采用鐵烙鋁合金電熱絲,特點:高效節能。

    關鍵詞:

    聯系我們

    Contact

    佛山市南海南工機械設備有限公司

    地點:佛山市南海區獅山鎮獅山科技工業園北園國獅路南工機械

    郵編:528225

    電話:0757-89961978

    手機:13703075431

    傳真:0757-89961977

    0757-89961978

    在線咨詢
    聯系電話

    0757-89961978

    掃描二維碼分享到微信

    91午夜福利视频,精品国产三级在线观看,免费香蕉依人在线视频
  • <legend id="66666"></legend>
  • <center id="66666"></center>