• <legend id="66666"></legend>
  • <center id="66666"></center>


    設備簡介  Equipment Introduction
    鋁合金型材
    在擠壓成型后,要進行時效處理,旨在迅速提高鋁合金型材的強度,有利于后續工序的操作和貯存、運輸,還有利于客戶的正常使用。時效處理在時效爐內進行。 


    時效爐由爐體、料車、熱風系統、電器控制四大部分組成。 爐體由鋼材圍成一個大空間,爐由前門及后壁封閉,形成一個熱風與鋁型材熱交換的空間。外面由A3鋼板,采用連繼焊接,并用型鋼加強,強度足夠,氣密性好。再采用我廠特有的色調油漆,美觀實用。內面板采用A3鋼板,為適應鋼板在常溫~250℃的熱變化。 


    爐門采用導軌式設計,靠爐門自重封閉爐門口,確保在加熱時熱氣不外泄。爐門的啟閉用擺線針減速機帶動,并輔以平衡重錘,利用電磁制動電機的自鎖,防止爐門自墮,確保運行安全。 
     

    料車由型鋼焊接而成,該爐由料車進爐加熱,料車用牽引鏈通過擺線針輪減速機及鏈輪來驅動,料車沿路軌行進,平穩可靠。


     爐子的加熱用燃氣燃燒機,加熱后的空氣被雙吸式循環風機送往料車上的分風口,并通過分風口分層噴向待加熱的產品。煙氣通過煙囪排走,維持正常的燃燒。爐內的溫度通過爐邊前、后合理分布的熱電偶測定,并控制火力的大小。 

    Aluminum alloy profile need to carry out aging treatment after the extrusion molding, in order to quickly improve the strength of aluminum alloy profile, it is conducive to the operation for the following processes and storage, transportation, and also conducive to the normal use for customers. Aging treatment is carried out in aging furnace

     

    The aging furnace is composed of furnace body, skip trolly, hot air system and electrical control. The furnace is a large space surrounded by steel. The furnace is enclosed by the front door and the back wall, forming a space for heat exchange between hot air and aluminum profiles. External using continuous welding with A3 steel plate, and reinforced with section steel, sufficient strength, great air tightness. Adopting our factory special tone paint, beautiful and practical. The inner panel adopts A3 steel plate to adapt to the thermal change of steel plate at room temperature ~ 250℃.

     

    The furnace door adopts the design of guide rail, close the door of the furnace by the dead weight of the furnace door, to ensure that the heat will not leak out during heating. The opening and latching of the furnace door is driven by the cycloid needle reducer and assisted by the balance weight hammer. The self-locking of the electromagnetic brake motor is use to prevent the furnace door from falling and ensure the safety of operation.

     

    The skip trolley is welded by section steel, and the furnace is heated by the skip trolly enter the furnace. The skip trolly is driven by the traction chain through cycloidal needle wheel reducer and sprocket wheel. The skip trolly travels along the road and rail, which is stable and reliable.

     

    The heated air is sent to the sub-tuyere on the skip trolly by the double-suction circulation fan with the gas burner for heating of the furnace, and then sprayed at the product to be heated layer by the sub-tuyere. The smoke is discharged through the chimney to maintain normal combustion. The temperature in the furnace is measured by the thermocouple with reasonable distribution in front and back of the furnace side, and the amount of the fire is controlled.

      

    時效爐 Aging furnace

    加熱區 Heating zone

    1-3

    最高使用溫度 Max operating temperature

    300°C

    保溫后溫差 Temperature difference

     after heat preservation

    ≤±5°C

    保溫時間   Heat preservation time

    按工藝設定 Set according to process

    升溫時間   Heat raising time

    按工藝設定 Set according to process

    加熱方式   Heating method

    天然氣,液化氣,柴油,電

    Natural gas, liquefied gas, diesel oil, electricity

    電器裝機容量

    Electrical installation capacity

    30 – 230kW

    料框數量 Number of baskets

    4/6/9/12/18 baskets框

    燃燒機熱功率 Burner thermal power

    按工藝設定 Set according to process

    風機功率 Fan power

    18 – 110kW


    未命名.jpg


     

    時效爐

    Aging Oven

    鋁合金型材在擠壓成型后,要進行時效處理,旨在迅速提高鋁合金型材的強度,有利于后續工序的操作和貯存、運輸

    聯系我們

    Contact

    佛山市南海南工機械設備有限公司

    地點:佛山市南海區獅山鎮獅山科技工業園北園國獅路南工機械

    郵編:528225

    電話:0757-89961978

    手機:13703075431

    傳真:0757-89961977

    0757-89961978

    在線咨詢
    聯系電話

    0757-89961978

    掃描二維碼分享到微信

    91午夜福利视频,精品国产三级在线观看,免费香蕉依人在线视频
  • <legend id="66666"></legend>
  • <center id="66666"></center>