• <legend id="66666"></legend>
  • <center id="66666"></center>


    全自動多條長棒加熱熱剪爐(簡稱全自動多棒熱剪爐)。采用了先進的熱風循環加熱方式,液壓熱剪切等多項新技術,具有加熱速度快、生產組織靈活、成品率高、自動化程度高、操作環境優越、能耗低等特點。


    性能特點: 爐子保溫性能好、棒溫均勻、熱效率高、耗能低。初始加溫時間為2.5-4小時可達到鋁棒擠壓溫度。 設備燃料可采用:天然氣、水煤氣、輕柴油等??刂品绞?PCL , 觸摸屏,分為全自動控制、半自動控制、手動控制三種形式,并設有爐溫超溫警報裝置。


    Automatic MULT-Hot Shearing Product Line:Using hot air circulation heating mode of advanced technology, new hydraulic thermal shear etc, the heating speed is fast, the production organization is flexible, high rate of finished products, high degree of automation, operation environment is superior, energy consumption. 


    Performance characteristics:Good thermal insulation properties ,  uniform temperature , high thermal efficiency, low energy consumption. The initial heating time is 2.5-4 hours can reach the aluminum bar extrusion temperature. The device can be used as the fuel: natural gas, water gas, light diesel oil.  Control mode : PCL, touch screen, divided intoautomatic control, semi automatic control and manual control in three forms, and is provided with a furnace temperature and over temperature alarm device. 


    主要技術參數 Main technical parameters

    全自動多棒熱剪爐 Full automatic multi billets heater

    設備型號 Model No.

    NG-BL(80-406)

    鋁棒直徑

    Diameter of Aluminum Bar

    Φ80~Φ406mm

    鋁棒長度

    Length of Aluminum Bar

    5000~8000m

    加熱燃料

    Heating Fuel

    輕柴油、液化汽油、天然氣、發生爐煤氣、城市煤氣、煤炭

    Light diesel、liquefied gas、natural gas, generator gas, city gas, coal

    剪棒長度

    Shearing Length

    300mm~800mm,長度可調至與擠壓機配套

    Can be adjusted to fit the extrusion press

    剪棒長度精度

    Shearing accuracy

    ±3mm

    連續生產耗能

    Energy consumption for continuous   production

    正常生產按產能或按一天平均每噸約25-35方左右

    In the case of regular production, the  energy consumption is about 25-35m3per ton (base on production capacity or  per day)

    溫差

    Temperature difference

    ±5℃

    總功率 Total power

    Approx.14.6kw

    壓縮空氣消耗量

    Compressed air consumption


    冷卻水流量

    Cooling water flow rate




     

    全自動多支長棒熱剪爐

    Full automatic multi billets heater

    全自動多條長棒加熱熱剪爐(簡稱全自動多棒熱剪爐)。采用了先進的熱風循環加熱方式,液壓熱剪切等多項新技術

    關鍵詞: 

    聯系我們

    Contact

    佛山市南海南工機械設備有限公司

    地點:佛山市南海區獅山鎮獅山科技工業園北園國獅路南工機械

    郵編:528225

    電話:0757-89961978

    手機:13703075431

    傳真:0757-89961977

    0757-89961978

    在線咨詢
    聯系電話

    0757-89961978

    掃描二維碼分享到微信

    91午夜福利视频,精品国产三级在线观看,免费香蕉依人在线视频
  • <legend id="66666"></legend>
  • <center id="66666"></center>